OpenFOAM version: 9 Case: clamp_12 Solver: clampPimpleFoam v4 A NEW SOLVER VERSION A lot of small fixes have be made on v3 of clampPimpleFoam. It’s time for a new version. The focus of this version will be to make Ts and Tf in TsEqn and TfEqn implicit instead of explicit. Previously, these were included as…
Read more
OpenFOAM version: 9 Case: clamp_11 Solver: clampPimpleFoam v3 BACKGROUND So far, the clamp modelling project has developed to the point where basically all the components of the model are in place. However, and as noted in the last post in the Results section, issues remain. The rate of heat transfer in the porous zone is…
Read more
In the first attempt at finding a solution to this model, the wrong kinematic viscosity was used. This permitted a solution to be found, but it was worthless. Once the correct kinematic viscosity for air was given, the steady state model would just diverge. The reason appears to be the simple fact that the model…
Read more
OpenFOAM version: 9 Case: clamp_09 Points of note: new coarser mesh, adjust time step implemented, 60 minute simulation. NEW MESHES There is a need for more speed in this simulation. It is currently moving at about 0.1 seconds per second. So a 3 day simulation would take 30 days. To achieve this increase in speed,…
Read more
Cover image: a sugar beet clamp captured with a drone mounted thermal camera. Skip to Coding convective heat transfer coefficient as a scalar field. BACKGROUND Convective heat transfer is the process by which heat is transfer from one region to another through the movement of a fluid. It results when there is a temperature difference…
Read more
THIS POST IS AN UPDATE ON A PREVIOUS POST IN WHICH THE WRONG KINEMATIC VISCOSITY WAS APPLIED IN THE SIMULATION. In 2003, Lope G. Tabil and three co-authors decided that they would make my 2021 life much much easier by publishing the paper Airflow Resistance of Sugarbeet. This paper reports some very useful values for…
Read more
UNDER CONSTRUCTION 2022-03-03: require experimental data for the permeability of the cover material TopTex. OpenFOAM version: 9 CASE: clamp_06, case_06_empty_clamp Solver: clampPimpleFoam-2 This post builds on two previous posts in which two heat equations were added to the pimpleFoam solver: one for the fluid phase, and one for the solid phase. That said, this post…
Read more
Case: clamp_05 Solver: clampPimpleFoam-1 -> clampPimpleFoam-2 This post is the second of two that are a record of how to modify the pimpleFoam solver of OpenFOAM to include heat transfer when there is: a porous region, two phases in this porous region (gas and solid), and a heat source within the solid phase. In the…
Read more
This post discusses the estimation of the surface area of sugar beet. For now, this is largely guess work – no empirical data to confirm the modelling results has yet been sourced. It seems likely that some experiment data exists (Stefan Paulus at Ifz, I’m looking at you), but it hasn’t been asked for yet.…
Read more
Case: clamp_04 Solver: pimpleFoam -> clampPimpleFoam This post is the first of two that a record of how to modify the pimpleFoam solver of OpenFOAM to include heat transfer when there is: a porous region, two phases (gas and solid = porous region), and a heat source within the solid region. In this post, a…
Read more